Main Page | Build Your Own | Magnetite Sources | FAQ (Q&A)  | Test Results | Product Catalog | Special Offers | Payment | ContactCopyright | Disclaimer

Prototype Product Product Catalog
for Experimental Proof of Principle (PoP) Products


ver. 1.4.6
last revision date: 11/03/2019

UPDATE as of March 8, 2012. Due to the fact that my inner guidance is asking me to spend more time on my work in the spiritual realms, the sale of all products listed on this website will cease at midnight on April 3, 2012. I do, however, plan to leave the website "on the air", that is, on the web, for years to come, because I have received so many compliments over the years from researchers about the quality of information presented herein.


Update, June 26, 2007: We will now ship the MEOW SM-2 ACRV-2 and SM-2 PVC-1 kettles outside the US via UPS. Click here for more details.

NEW, as of June 10, 2007: Click here to see our small portable MEOW and Laminar Crystal pod products (i.e., dunking sceptres and eggs.)


A Brief Introductory Note
I have, since early 2007, been receiving requests from friends and colleagues for me to offer for sale bottles of MEOW treated water and largely-assembled, fill-it-yourself MEOW devices. After a first wave of product offerings since mid-March 2007 featuring fully assembled MEOW devices, I invested several thousand more dollars in further R&D, primarily in materials costs and precision machine shop costs, and have decided to offer from this point onward primarily MEOW devices which are largely-assembled, and where the customer, after receiving and unpacking the device, fills the intercoaxial cylinder space themselves with magnetite black sand (which they will have procured from a source of their choice) and then mounts a plastic ring or donut over the top of the mass of magnetite to afford the magnetite some degree of protection from accidental spillage and from dust. And now, as of mid-April 2007, I am willing to tentatively offer some proof-of-principle (PoP) prototype devices for sale only to interested researchers and experimenters. However, you may first wish to read the section immediately below entitled Caveat -- Please Read Before Purchasing any Prototype MEOW Devices.

A Short Glossary
Please bear in mind as you peruse the pages of this website the meanings of the following terms:

MEOW -- magnetite effect ormus water

MEOW device -- a device employing a mass of magnetite black sand which is used for MEOW transformation of water or other aqueous liquids. A MEOW device usually consists of a container holding a shell of magnetite with a hollow within into which a bottle of water may be inserted for treatment.

MEOW kettle -- an alternate term for a MEOW device; term is used interchangeably with the terms MEOW device or MEOW alembic.

MEOW alembic -- an alternate term for a MEOW device; term is used interchangeably with the terms MEOW kettle or MEOW device.

If you wish to read more about these terms and how they came into use, please see the section entitled A Note on Boring Terms and Not-So-Boring Terms and a Short Glossary, on the main page of this website.
.

Please note that, in general, the MEOW devices offered herein as PoP prototypes are considerably larger than the traditional MEOW devices fabricated out of cardboard oatmeal cans, and contain a much large volume and mass of magnetite sand, usually on the order of 22 to 29 pounds of magnetite sand, compared to the 8 to 10.5 pounds of magnetite sand commonly found in the cardboard versions. Because of this, the length of treatment in these larger MEOW devices may be somewhat shorter than the typical 3 to 5 day treatment period seen with the cardboard versions of the traditional MEOW device. And, of course, some of the prototype product offerings on this page are for more powerful versions of MEOW devices, such as the MEOW SM-2, MEOW SM-3 and the MEOW SM-3-SCA, and so the length of treatment may be even far shorter than seen with traditional MEOW designs.

Caveat -- Please Read Before Purchasing any Prototype MEOW Devices
Let me be the first to remind you that you can do it much more cheaply on your own if you are willing and able to construct a few devices for yourself at home or in your shop or laboratory. My largely-assembled, fill-it-yourself plastic shell devices are -- to my mind, at least -- somewhat pricey, and that is for a good reason: It is rather easy and simple and inexpensive to throw together a basic makeshift magnetite water treatment device at home using cardboard and a hot glue gun, and a makeshift and somewhat fragile basic version of the device can likely be built for about $100 (or for even less if you do not add the special supplemental mixture to the magnetite sand.) However, such a device offers only a relatively small mass of magnetite sand for treatment effect, and would likely not withstand much abuse in the home, office, shop or lab. On the other hand, the type of MEOW devices which folks have been requesting from me have been largely a rather robust, sturdy and strong version of the MEOW devices which employ sturdy plastic and/or plastic laminate (i.e., phenolic) construction, and which can survive normal minor day-to-day insults and bumps. The problem is that this is doable, but it is costly due to material costs, machining and fabrication  charges from precision machine shops, and final fabrication and assembly time/hassle at my end prior to shipping the devices. Thus, if you are considering purchasing any of my PoP prototype devices, I urge you to first consider simply constructing some devices at home or in your shop out of cardboard and hot glue.

Note Regarding Offer of PoP Prototype Devices
These PoP prototype devices are intended for sale to individual researchers and experimenters who wish to experiment with, play with, or tinker, tweak and fine-tune these Proof-of-Principle prototype devices for any of a variety of applications.

Catalogue

A catalogue of some off-the-shelf Proof of Principle (PoP) prototype offerings follows, along with pricing. Offerings are very limited in quantity, intended for bona-fide individual researchers and experimenters only and, of course, we reserve the right to determine what is available for sale, and to whom, at a given moment. All sales are final. Please be forewarned that some potential or would-be purchasers may be turned down, for any of several reasons.

NEW, as of June 10, 2007: Click here to see our small portable MEOW and Laminar Crystal pod products (i.e., dunking sceptres and eggs.)



Click here to go to the Payments page if you wish to order.


General Terms and Return/Refund Policies

These terms apply to any and all devices shown or offered on this website.

Basics
We cannot sell to residents of Maryland or Illinois.

Remember that we offer no warranty or guarantee, express or implied. All sales are final. No returns, no refunds, no samples, no trade-ins toward later purchases. We do not sell consumer items, but rather only sell PoP prototype experimental research devices to researchers, engineers, scientists, commercial R&D laboratories and OEMs.

All sales are final. Once placed, orders cannot be cancelled or changed and no refunds are possible.

All orders must be prepaid. We usually ship most prototype devices within one to two weeks of receipt of cleared  payment. Larger orders or orders for three or more of one type of device may result in longer lead times prior to shipment.

All customers outside USA are responsible for paying any customs fees, broker fees, import duty and any other fees which may be incurred by shipment of products.

These are PoP Prototype Devices; They May Not be "Pretty"
Please understand that any and all products are PoP prototype devices, and are sold as prototype experimental research devices only, and with no attendant claims of performance or effect. All sales are final. We have a no-return policy, and so there are no returns or refunds allowed, accepted or offered; likewise we cannot accept trade-ins of already-purchased prototypes toward purchases of other (i.e., more expensive) prototype models. There are no guarantees or warranties as to performance, effects, results, or workability offered, expressed, or implied. There are no other warranties or guarantees expressed or implied. This is largely because these devices are offered ONLY on a very limited basis, are not offered on the consumer marketplace, and are offered only as proof of principle (PoP, aka proof of concept) prototypes. In other words these are engineering evaluation prototypes, designed for use by experimenters, researchers, scientists and engineers.

Since these are proof-of-performance prototypes (aka proof of concept prototypes) and each unit has been carefully handcrafted manually and designed and engineered primarily for functionality, and thus they will look as if they were built by hand, complete with variations in appearance and consistency of design or engineering across models and within models; the devices may not be "pretty" from an aesthetic point of view. In other words, these devices are NOT polished consumer-oriented devices produced by automated assembly-line mass-production lines, and rather, are constructed by hand. You must realize that there will be some variance in appearance across devices within the same model, and most of the devices may bear one or more cosmetic blemishes due to the manual nature of the assembly process. Further, these devices bear simple waterproof printed paper labels bearing only text, instead of the fancier multi-colored labels complete with images or logos often found on mass-produced consumer devices. Likewise, if you were to examine the interior of the devices, you will notice considerable variance in appearance and layout even within a model line as we experiment with various methods of component placement, and also due to availability of certain key components. 

Note on Quoted Ground Shipping Costs Within USA
Most prototype products listed herein will disclose a typical S/H charge for domestic shipping and handling within the domestic contiguous mainland USA. For shipping to other countries and points in the USA such as Hawaii or to USA territories, please contact us for a quote for S/H fees.

Some Brief Notes and Terms for Orders and Shipping Outside USA
Please note that at this time, our SM-3 technology devices cannot be shipped outside domestic mainland USA due to the presence of powerful magnets within the devices and the size of container required.

Shipping of acrylic and PVC SM-2 technology devices is now available outside USA via UPS. Contact us for shipping price quote. Overseas shipping for SM-2 devices can come to well over $200 due to the size of the box required. We will only ship MEOW SM-2 kettles via UPS (and not USPS) due to UPS's superior tracking system, brokerage and customs handling.

Yes, we do ship regularly to countries outside the USA. Aside from SM-2 kettles, we usually ship outside-US orders via USPS Global Express Mail insured, as it is relatively inexpensive and quite reliable, and even offers a modicum of a tracking number. If you need a quote on S/H charges via USPS Global Express Mail to your country for one or more devices, please just ask and I will send you an exact S/H charge quote via return email. We can also ship to foreign countries via UPS if you ask, but that mode of shipping is considerably more expensive than USPS Global Express Mail. For all outside-USA shipping, we provide a full Customs shipping declaration sheet. Customer bears responsibility for any and all Customs charges or surcharges imposed by Customs or their government agencies.

While we do ship all packages insured, we are responsible for shipping orders only, and once shipped, our responsibility has ended. The customer takes fully responsibility for the package once we have shipped it at our local shipping depot.

Payment
All orders must be prepaid. Shipment time for most orders consisting of 1 or 2 prototype devices is within one to two weeks of receipt of payment. Lead time on larger orders may be longer. Expedited preparation and shipping may be available at a surcharge of $60 to $200 per device.

Please understand that if you are placing an order for 3 or more devices of the same type, or placing a large order, lead time after payment is received may be considerably longer than the normal stated times.

All sales are final. Once placed, orders cannot be cancelled or changed and no refunds are possible.


For payment methods, please see the Payments Page.



Here is a Quick Table of Contents to Serve as a Guide to Prototype Product Offerings Below:


Also: Click here to see our small portable MEOW and Laminar Crystal pod products (i.e., dunking sceptres and eggs.)

Please note that all PoP prototype devices listed below are sold and shipped as largely pre-assembled empty plastic shells which you fill with magnetite sand from your own source once you have received the assembly, after which you affix the plastic ring or donut supplied above the mass of magnetite sand to afford it some degree of protection from spillage and from dust.

Largely-Assembled Fill-it-yourself MEOW Kettle Shells
You fill the empty kettle, upon receipt, with magnetite from your own source, and then affix the plastic ring or donut "cap" atop the magnetite fill. Please note that SM-2 and SM-3 devices are offered primarily only to domestic mainland USA customers only, and only via Ground shipping, due to shipping concerns regarding massive magnets contained in these devices.

Traditional MEOW Kettle Models
As you likely already know from reading the other pages on this site, a 16 to 25 ounce bottle of water is usually treated for 3 to 4 days before drinking the water. Most users will own from three to six to as many as twenty of these "traditional" design kettles.

Cardboard Oatmeal Can Version of Traditional MEOW Kettle -- Model MEOW CV-1

Acrylic Pipe Version of Traditional MEOW Kettle -- Model MEOW ACRV-1

Acrylic Pipe Version of Traditional MEOW Kettle -- Model MEOW ACRV-2

PVC Pipe Version of Traditional MEOW Kettle -- Model MEOW PVCV-1


SM-2 MEOW Kettle Models (also information on MEOW SM-0.6 and SM-1 models as well)

As you already know from reading the other pages on this site, the SM-1 and the SM-2 models employ a powerful magnet configured with the magnetite sand in a unique geometry which was the result of direct guidance from Holy Spirit. The only difference between the SM-1 and the SM-2 models is that the latter employs a larger and more powerful magnet, and thus the treatment effect is even stronger and the treatment time even shorter. Our experience has shown, and my intuition has verified, that normal treatment time for a 16 to 26 ounce bottle of water in an SM-2 model kettle is about 50 minutes to reach a point/strength similar to that seen after 3 full days of exposure in a traditional cardboard MEOW kettle, and I normally treat a bottle of water in an SM-2 kettle for at least 3 to 5 hours, if not longer, to get an even more powerful effect. (BTW, the MEOW SM-1 model kettle has a slightly weaker effect, and thus it requires about 1.5 hours to reach a point equivalent to 3 days of exposure in a traditional MEOW kettle.) Most owners of MEOW SM-2 kettles own only one such kettle; they may also own one or more of the traditional (i.e., no magnetic enhancement) MEOW kettles as well.

Note: Early prototype versions of the MEOW SM-0.6 model, the MEOW SM-1 model and the MEOW SM-2 model in cardboard oatmeal can design may occasionally be available, and we announce any such occasional offerings on the Specials page.

Acrylic Pipe Version of MEOW SM-2 Kettle -- Model MEOW SM-2 ACRV-2

PVC Pipe Version of MEOW SM-2 Kettle -- Model MEOW SM-2 PVC-1


SM-3 MEOW Alembic Models
While the SM-2 is simply a more powerful version of the SM-1 design, employing the same geometry but a larger and more powerful magnet, the SM-3 employs even larger and more powerful magnets, arrayed in a geometry which is quite different from that employed in the SM-0, SM-0.6, SM-1 and SM-2 models. As with the other enhanced MEOW kettle models, the geometry of the SM-3 design was the result of direct guidance from Holy Spirit. The SM-3 model has an even stronger and "faster" effect than does the SM-2 model. Our experience has shown, and my intuition has verified, that normal treatment time for a 16 to 26 ounce bottle of water in an SM-3 model alembic is about 25 minutes to reach a point/strength similar to that seen after 3 full days of exposure in a traditional cardboard MEOW kettle, and I normally treat a bottle of water in an SM-3 kettle for at least 2 to 5 hours, if not longer, to attain an even more powerful effect. Most owners of MEOW SM-3 kettles own only one such kettle; they may also own one or more of the traditional (i.e., no magnetic enhancement) MEOW kettles as well.

PVC/Bucket Version of MEOW SM-3 Alembic -- Model MEOW SM-3 PVC-1

PVC/Bucket Version of MEOW SM-3 Alembic w/SCA Antenna option -- Model MEOW SM-3-SCA PVC-1


Other MEOW and MEOW-Related Products
Please note that all bottles of treated spring water offered here involve external and non-invasive physical treatment of water in a sealed bottle of spring water purchased from a local spring water vendor. The bottles remain sealed and are never opened during treatment. All bottles are shipped bearing the original bottler's seal and bearing the original bottler's or vendor's label, with an additional small label indicating that the water has been exposed to the MEOW treatment; the label further specifies whether the MEOW treatment type was traditional or SM-2.

Magnetite Sand Supplemental Mixture for Use in MEOW Kettles

21 oz Bottle of Spring Water, Treated for 3 Days with Traditional MEOW Treatment Kettle

21 oz Bottle of Spring Water, Treated for 13 Hours with MEOW SM-2 Treatment Kettle

Magnetite Black Sand  --
Note: We do NOT offer magnetite black sand for sale at this time. Please see Magnetite Sources page for sources. 

Vortex Field Effect (VFE) and VFER Devices
Please note that these devices are a very new technology which I have developed and are highly experimental prototypes. Unlike the MEOW kettles listed above, the VFE devices do NOT involve treatment of a static batch of water sealed in a bottle, and rather, they are flow-thru devices in which a user pours water slowly into the copper tubing at the top of the device; it emerges seconds later from a port located at the bottom of the device. In the current design, the device must be set on the edge of a countertop to allow a user to hold a cup or pitcher under the "spigot" from which the water exits. It must be stressed that these devices are highly experimental, and you are encouraged to use your best judgment and inner guidance in making a decision if you are tempted to purchase one of these experimental PoP prototype devices.

VFE-MEOW Water Treatment Device

VFE-EGGS Water Treatment Device



Click here to go to the Payments page if you wish to order.


Detailed Product Listings

Largely-Assembled Fill-it-yourself MEOW Kettle Shells
You fill the empty kettle shell, upon receipt, with magnetite from your own source, and then affix the plastic ring or donut "cap" atop the magnetite fill. Please note that SM-2 and SM-3 kettles are offered primarily only to domestic mainland USA customers only, and only via Ground shipping, due to shipping concerns regarding massive magnets contained in these devices.


Traditional MEOW Kettle Models
As you likely already know from reading the other pages on this site, a 16 to 25 ounce bottle of water is usually treated for 3 to 4 days before drinking the water. Most users will own from three to six to as many as twenty of these "traditional" design kettles.


Cardboard Oatmeal Can Version of Traditional MEOW Kettle -- Model MEOW CV-1
I offer this largely-assembled, fill-it-yourself cardboard oatmeal "can" version of the device only reluctantly, upon the request of some friends and colleagues. I must note that particularly with this device, above and beyond all our MEOW device offerings, you could build the same device yourself for a fraction of the cost in your shop, office, lab or home.


Sample picture only. Actual appearance of device may differ somewhat from that shown in photo, including variations in cover material and in color.

Please note that this device consists of all-cardboard and hot glue construction; these cardboard devices are relatively fragile, particularly once filled, and must be handled with care. When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 8.0 pounds to 10.7 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with two cardboard cutout donuts or rings which you may emplace atop the magnetite sand fill after filling; you may affix the rings in place using tape or a hot glue gun, or other suitable adhesive.

Specifications:
Cardboard shell has been treated with syntropic antioxidative microbe technology.
Inner and outer shell material: cardboard cylinders
Material employed for foot/base of device: cardboard
Outer diameter of outer shell: ~4.88"
Inner diameter of inner shell (space for bottle): ~2.86"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~0.92"
Overall height of device: ~9.6"
Height of magnetite fill in intercoaxial cylinder space: ~9.2"
Height of inner cylinder inside space available for placing bottle under treatment: ~9.2" 
Approximate weight of magnetite black sand needed to fill: 8 to 10.5 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Are two cardboard top-rings (donuts) for sealing/protecting magnetite sand included? Yes

Contains: empty coaxial cardboard shell for filling (with magnetite sand which you have procured), with plastic or card stock covering on exterior, two cardboard rings for top of magnetite mass, and one adhesive label, provided in small ziplock bag.
Price: $39 per kettle. S/H charge for ground shipping within domestic mainland USA: $15


Acrylic Pipe Version of Traditional MEOW Kettle -- Model MEOW ACRV-1

Picture of sample device only. Device shown filled with magnetite; device sold empty (unfilled); must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.


Picture of sample device only. Device shown empty (unfilled) as sold; must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.

Please note that this device employs acrylic pipe for inner and outer plastic shell, and the base or foot is a disk of acrylic stock (clear) or phenolic stock (reddish-brown.) Of the two acrylic versions available, this version offers the smaller-diameter inner cylinder, to allow a greater mass and radial thickness of magnetite to be used.

Specifications:
Device employs syntropic antioxidative microbe technology in base assembly.
Inner and outer shell material: acrylic (clear)
Material employed for foot/base of device: acrylic (clear) or reddish-brown plastic laminate (phenolic)
Outer diameter of outer shell: 6"
Inner diameter of inner shell (space for bottle): ~3.0"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.37"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
A mass of magnetite sand (w/supplemental mix) weighing from 4 to 8 oz, is prefilled at bottom of center cylinder (i.e., directly below bottle placement area)
Approximate weight of magnetite black sand needed to fill: 24 to 26 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall cylindrical area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 24 pounds to 26 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial acrylic plastic shell for filling (with magnetite sand which you have procured), one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.
Price: $360 per kettle. S/H charge for ground shipping within domestic mainland USA: $42


Acrylic Pipe Version of Traditional MEOW Kettle -- Model MEOW ACRV-2

Picture of sample device only. Device shown filled with magnetite; device sold empty (unfilled); must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.


Picture of sample device only. Device shown empty (unfilled) as sold; must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.

Please note that this device employs acrylic pipe for inner and outer plastic shell, and the base or foot is a disk of acrylic stock (clear) or phenolic stock (reddish-brown.) Of the two acrylic versions available, this version offers the larger-diameter inner cylinder, allowing use of larger-diameter bottles, but allowing a slightly lesser mass and radial thickness of magnetite to be used.

Specifications:
Device employs syntropic antioxidative microbes (SAM) technology in base assembly.
Inner and outer shell material: acrylic (clear)
Material employed for foot/base of device: acrylic (clear) or reddish-brown plastic laminate (phenolic)
Outer diameter of outer shell: 6"
Inner diameter of inner shell (space for bottle): ~3.25"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.12"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
A mass of magnetite sand (w/supplemental mix) weighing from 4 to 8 oz, is prefilled at bottom of center cylinder (i.e., directly below bottle placement area)
Approximate weight of magnetite black sand needed to fill: 21 to 24 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall cylindrical area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 21 pounds to 24 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial acrylic plastic shell for filling (with magnetite sand which you have procured), one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.
Price: $360 per kettle. S/H charge for ground shipping within domestic mainland USA: $42

Click here to go to the Payments page if you wish to order.


PVC Pipe Version of Traditional MEOW Kettle -- Model MEOW PVCV-1

Picture of sample device only. Device shown filled with magnetite and with top ring /donut cover in place over magnetite fill. Device sold empty (unfilled); must be filled by customer with magnetite from your own source. Bottle shown sitting inside device is a 25 oz PET spring water bottle. Actual appearance of device may differ somewhat from that shown in photo.

Please note that this device employs strong and sturdy PVC pipe for inner and outer plastic shell, and the base or foot is a disk of phenolic stock (reddish-brown.) This version offers a larger-diameter inner cylinder, allowing use of larger-diameter bottles of up to about 3.1" in diameter. 

Specifications:
Device employs syntropic antioxidative microbes (SAM) technology in base assembly.
Inner and outer shell material: tough PVC pipe
Material employed for foot/base of device: reddish-brown plastic laminate (phenolic)
Outer diameter of outer shell: 6.275"
Inner diameter of inner shell (space for bottle): ~3.1"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.41"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
A mass of magnetite sand (w/supplemental mix) weighing from 4 to 8 oz, is prefilled at bottom of center cylinder (i.e., directly below bottle placement area)
Approximate weight of magnetite black sand needed to fill: 27 to 29 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall center cylinder area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 27 pounds to 29 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial PVC plastic shell for filling (with magnetite sand which you have procured), one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.
Price: $385 per kettle. S/H charge for ground shipping within domestic mainland USA: $39

Click here to go to the Payments page if you wish to order.


SM-2 MEOW Kettle Models (also information on MEOW SM-0.6 and SM-1 models as well)

As you already know from reading the other pages on this site, the SM-1 and the SM-2 models employ a powerful magnet configured with the magnetite sand in a unique geometry which was the result of direct guidance from Holy Spirit. The only difference between the SM-1 and the SM-2 models is that the latter employs a larger and more powerful magnet, and thus the treatment effect is even stronger and the treatment time even shorter. Our experience has shown, and my intuition has verified, that normal treatment time for a 16 to 26 ounce bottle of water in an SM-2 model kettle is about 50 minutes to reach a point/strength similar to that seen after 3 full days of exposure in a traditional cardboard MEOW kettle, and I normally treat a bottle of water in an SM-2 kettle for at least 3 to 5 hours, if not longer, to get an even more powerful effect. (BTW, the MEOW SM-1 model kettle has a slightly weaker effect, and thus it requires about 1.5 hours to reach a point equivalent to 3 days of exposure in a traditional MEOW kettle.) Most owners of MEOW SM-2 kettles own only one such kettle; they may also own one or more of the traditional (i.e., no magnetic enhancement) MEOW kettles as well.


Acrylic Pipe Version of MEOW SM-2 Kettle -- Model MEOW SM-2 ACRV-2

Picture of sample device only. Device shown filled with magnetite; device sold empty (unfilled); must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.


Picture of sample device only. Device shown empty (unfilled) as sold; must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo.

Please note that this device employs acrylic pipe for inner and outer plastic shell, and the base or foot is a disk of acrylic stock (clear) or phenolic stock (reddish-brown.) 

Specifications:
Device employs syntropic antioxidative microbes (SAM) technology in base assembly.
Inner and outer shell material: acrylic (clear)
Material employed for foot/base of device: acrylic (clear) or reddish-brown plastic laminate (phenolic)
Outer diameter of outer shell: 6"
Inner diameter of inner shell (space for bottle): ~3.25"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.12"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
A large and powerful magnet is emplaced at bottom of center cylinder (i.e., directly below bottle placement area)
Approximate weight of magnetite black sand needed to fill: 21 to 24 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall cylindrical area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

CAUTION: Device contains powerful large magnet near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 21 pounds to 24 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial acrylic plastic shell, with embedded powerful magnet emplaced, for filling with magnetite sand which you have procured, one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.

CAUTION: Device contains powerful large magnet near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.


Price: $695 per kettle. S/H charge for ground shipping within domestic mainland USA: $42



PVC Pipe Version of MEOW SM-2 Kettle -- Model MEOW SM-2 PVC-1

Picture of sample device only. Device shown filled with magnetite and with top ring / donut cover in place over magnetite fill. Device sold empty (unfilled); must be filled by customer with magnetite from your own source. Bottle shown sitting inside device is a 25 oz PET spring water bottle. Actual appearance of device may differ somewhat from that shown in photo.

Please note that this device employs strong and sturdy PVC pipe for inner and outer plastic shell, and the base or foot is a disk of phenolic stock (reddish-brown.) This version offers a larger-diameter inner cylinder, allowing use of larger-diameter bottles of up to about 3.1" in diameter. 

Specifications:
Device employs syntropic antioxidative microbes (SAM) technology in base assembly.
Inner and outer shell material: tough PVC pipe
Material employed for foot/base of device: reddish-brown plastic laminate (phenolic)
Outer diameter of outer shell: 6.275"
Inner diameter of inner shell (space for bottle): ~3.1"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.41"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
A large and powerful magnet is emplaced at bottom of center cylinder (i.e., directly below bottle placement area)
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
Approximate weight of magnetite black sand needed to fill: 27 to 29 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall center cylinder area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

CAUTION: Device contains powerful large magnet near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 27 pounds to 29 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial PVC plastic shell with embedded powerful magnet emplaced, for filling with magnetite sand which you have procured, one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.

CAUTION: Device contains powerful large magnet near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.


Price: $720 per kettle. S/H charge for ground shipping within domestic mainland USA: $39



Click here to go to the Payments page if you wish to order.


SM-3 MEOW Alembic Models

While the SM-2 is simply a more powerful version of the SM-1 design, employing the same geometry but a larger and more powerful magnet, the SM-3 employs even larger and more powerful magnets, arrayed in a geometry which is quite different from that employed in the SM-0, SM-0.6, SM-1 and SM-2 models. As with the other enhanced MEOW kettle models, the geometry of the SM-3 design was the result of direct guidance from Holy Spirit. The SM-3 model has an even stronger and "faster" effect than does the SM-2 model. Our experience has shown, and my intuition has verified, that normal treatment time for a 16 to 26 ounce bottle of water in an SM-3 model alembic is about 25 minutes to reach a point/strength similar to that seen after 3 full days of exposure in a traditional cardboard MEOW kettle, and I normally treat a bottle of water in an SM-3 kettle for at least 2 to 5 hours, if not longer, to attain an even more powerful effect. Most owners of MEOW SM-3 kettles own only one such kettle; they may also own one or more of the traditional (i.e., no magnetic enhancement) MEOW kettles as well.


PVC/Bucket Version of MEOW SM-3 Alembic -- Model MEOW SM-3 PVC-1

Picture of sample device only. Device shown filled with magnetite and with top ring/donut cover in place over magnetite fill. Device sold empty (unfilled); must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo. Many versions of device will include a thick plastic, rubber or foam girdle or bumper emplaced around circumference of bucket near bottom and at halfway point from bottom (emplaced to improve isolation of magnets from exposure to outside world.)


Picture of sample device only. Device shown filled with magnetite and with top ring / donut cover in place over magnetite fill. Device sold empty (unfilled); must be filled by customer with magnetite from your own source. Actual appearance of device may differ somewhat from that shown in photo. Many versions of device will include a thick plastic, rubber or foam girdle or bumper emplaced around circumference of bucket near bottom and at halfway point from bottom (emplaced to improve isolation of magnets from exposure to outside world.)

Please note that this device employs strong and sturdy PVC pipe for inner and outer plastic shell, and the inner base or foot (inside bucket) is a disk of phenolic stock (reddish-brown.) This version offers a large-diameter inner cylinder, allowing use of larger-diameter bottles of up to about 3.1" in diameter. 

Specifications:
Device employs syntropic antioxidative microbe (SAM) technology in base assembly.
Outer shell for entire device: 5 gallon HDPE plastic bucket (usually green in color)
Inner and outer shell material of actual device: tough PVC pipe
Outer diameter of outer shell housing magnetite: 6.275"
Inner diameter of inner shell (space for bottle): ~3.1"
Radial thickness of intercoaxial cylinder space for filling with magnetite: ~1.41"
Overall height of device: from 13.6 to 14.25"
Height of magnetite fill in intercoaxial cylinder space: 11.8" to 12.8"; extends above and below water level in most 24 oz PET bottles
At least two very large and very powerful magnets are emplaced inside the bucket, most often located near midway between top and bottom of bucket.
Height of inner cylinder space available for placing bottle under treatment: 9.7" to 10.7"
Approximate weight of magnetite black sand needed to fill: 27 to 29 lbs
Device is shipped largely-assembled and unfilled; customer fills with magnetite which they have procured from their own sources.
Is plastic top-ring (donut) for sealing/protecting magnetite sand included? Yes

Notes: Please note that polyester resin (with syntropic antioxidative microbe technology incorporated) is employed in the bottom of the coaxial cylinders for structural and performance purposes. Due to this fact, the space provided for a bottle in the center cylinder may emit some odor of polyester resin for the first few months due to poor air circulation in the tall center cylinder area. If you become concerned about the odor, you may wish to use glass bottles instead of plastic bottles for first few months until gases have fully vented.

CAUTION: Device contains powerful large magnets near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.

When you receive and unpack the device, you fill it with magnetite sand which you have procured from your own choice of sources. The inter-coaxial shell of the device will hold from 27 pounds to 29 pounds of magnetite black sand, depending upon how well it has been tamped during and after filling, and depending upon choice of fill height. Each device is supplied with one plastic donut or ring which you may emplace atop the magnetite sand fill after filling; you may affix the ring in place using screws (provided; holes pre-drilled as appropriate), tape or a hot glue gun, another suitable adhesive, or by pouring polyester resin.

Contains: empty coaxial PVC plastic shell with embedded powerful magnet emplaced, for filling with magnetite sand which you have procured, built into 5 gallon HDPE plastic bucket to isolate magnets from outside world, one plastic donut (ring) for placing atop magnetite mass after filling, and one adhesive label, provided in small ziplock bag.

CAUTION: Device contains powerful large magnets near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.


Price: $1,650 per device. Available only in mainland domestic USA due to very powerful and large magnets embedded in device. Ground shipping only. S/H charge for ground shipping within domestic mainland USA: $72




PVC/Bucket Version of MEOW SM-3 Alembic w/SCA Antenna option -- Model MEOW SM-3-SCA PVC-1

All photos and specifications exactly as listed above for MEOW SM-3 Device, but with three Spiral Coherent Antennas (SCA technology) incorporated in design. These antennas seem to increase the power and depth of the effect.


CAUTION: Device contains powerful large magnets near base. Please exercise due caution in handling device and keep base area away from magnet-sensitive objects.


Price: $1,875 per device. Available only in mainland domestic USA due to very powerful and large magnets embedded in device. Ground shipping only. S/H charge for ground shipping within domestic mainland USA: $72

Click here to go to the Payments page if you wish to order.


Other MEOW and MEOW-Related Products
Please note that all bottles of treated spring water offered here involve external and non-invasive physical treatment of water in a sealed bottle of spring water purchased from a local spring water vendor. The bottles remain sealed and are never opened during treatment. All bottles are shipped bearing the original bottler's seal and bearing the original bottler's or vendor's label, with an additional small label indicating that the water has been exposed to the MEOW treatment; the label further specifies whether the MEOW treatment type was traditional or SM-2.

Magnetite Sand Supplemental Mixture for Use with Magnetite Sand in MEOW Kettles
(Supplemental Mixture for Adding to Magnetite Sand)
Since mentioning my supplemental mixture which serves as an amendment to be thoroughly mixed with a high-quality magnetite sand for use in the treatment devices, I have received requests from a number of persons across the world wishing to order some of the supplemental mixture from me. As a result, I offer this supplemental mixture in ziplock bags filled with 17 to 20 ounces of the mixture, which is sufficient to treat 25 pounds of magnetite sand (or even enuf to treat 50 pounds with a somewhat lesser level of efficacy.) You would simply pour the magnetite and this mixture into a bucket (be careful -- both powders can be dusty!) and mix well before decanting the final mixture into the inter-cylinder space of your coaxial MEOW treatment device(s). Each bag of the magnetite enrichment amendment weighs about 17 to 20 ounces, and is sufficient to treat 25 pounds (up to 50 pounds maximum, with slight lessening of improvement) of magnetite.

Price: $72 per bag. S/H charge for UPS Ground or USPS Priority Mail shipping within the continental USA: $16


21 oz Bottle of Spring Water, Treated for 3 Days with Traditional MEOW Treatment Kettle
One bottle of spring water treated for at least 3 full days and nights with the traditional version device design, nominal water volume 21 ounces (actual volume will be between 21 and 24 fluid ounces)
Most users drink one to two bottles of water per day.

Price: $90 plus $17 S/H for UPS Ground or USPS Priority Mail shipping within continental USA for first bottle; add $4 S/H for each additional bottle up to eight bottles. 


21 oz Bottle of Spring Water, Treated for 13 Hours with MEOW
SM-2 Treatment Kettle
One bottle of spring water treated with SM-2 version for at least 13 hours, nominal water volume 21 ounces (actual volume will be between 21 and 24 fluid ounces).
Most users drink one to two ounces of water twice per day at the start. Higher rate of intake may result in occurrence of temporary tissue cleansing (aka tissue detoxification) symptoms.

Price: $60 plus $17 S/H for UPS Ground or USPS Priority Mail shipping within continental USA for first bottle; add $4 S/H for each additional bottle up to eight bottles. 


Note on Magnetite Black Sand
We do NOT offer magnetite black sand for sale at this time, nor do we plan to offer it. Please see Magnetite Sources page for sources. However, please contact us if you hit an emergency situation and are unable to procure magnetite black sand; we will try to assist you.

Click here to go to the Payments page if you wish to order.


Vortex Field Effect (VFE) and VFER Devices
Please note that these devices are a very new technology which I have developed and are highly experimental prototypes. Unlike the MEOW kettles listed above, the VFE devices do NOT involve treatment of a static batch of water sealed in a bottle, and rather, they are flow-thru devices in which a user pours water slowly into the copper tubing at the top of the device; it emerges seconds later from a port located at the bottom of the device. In the current design, the device must be set on the edge of a countertop to allow a user to hold a cup or pitcher under the "spigot" from which the water exits. It must be stressed that these devices are highly experimental, and you are encouraged to use you best judgment and inner guidance in making a decision if you are tempted to purchase one of these experimental PoP prototype devices.


VFE-MEOW Water Treatment Device

Picture of sample device only. Actual appearance of device may differ somewhat from that shown in photo. Certain interior proprietary technologies are not shown in photos.


Picture of sample device only. Actual appearance of device may differ somewhat from that shown in photo. Certain interior proprietary technologies are not shown in photos.


Picture of sample device only. Actual appearance of device may differ somewhat from that shown in photo. Certain interior proprietary technologies are not shown in photos.


Picture of sample device only. Actual appearance of device may differ somewhat from that shown in photo. 

Picture of sample device only. Actual appearance of device may differ somewhat from that shown in photo. Certain interior proprietary technologies are not shown in photos.

I call the passive (non-motorized, non-powered) vortex type of field effect technology by the name "vortex field effect" or by the abbreviation VFE. In this VFE-MEOW version, the material used in the design is magnetite black sand, and thus it is called a VFE-MEOW device. VFE devices do not employ batch treatment as seen in the traditional MEOW devices, and rather, employ a flow-thru design. This is markedly unlike the traditional MEOW design wherein a bottle of water is placed inside a MEOW device for a period of time for treatment, and rather, the user pours a cupful or two of water through a VFE device for treatment, and the water emerges into a cup or pitcher a few seconds later, after having been treated. Please understand that this is a very new and experimental technology.

Brief Specifications:
Device is built into a 2 gallon white (or black) plastic bucket, fitted with a sealed lid. You are strongly encouraged not to open the sealed lid so as not to disrupt alignment of key components.
Syntropic antioxidative microbe technology has been used in the design and fabrication of the device.
This is a flow-thru device. Water is poured slowly into top funnel, and emerges after a few seconds from port near bottom of bucket.
All copper tubing employed is food-grade tubing.
When in use, device must be placed near the edge of a countertop or table so that the spout extends over the edge, allowing user to place a cup or pitcher below device to collect water.
When device has not been used for over eight hours, please first flush the tube by pouring a quart or more of hot tap water thru it to flush any "old" water from inside the copper tubing prior to use. The waste flush water may be dumped into your compost pile, etc.
This device is highly experimental in nature.
All magnetite needed in the device for proper operation has been emplaced and embedded at time of fabrication of the device, and thus there is no need to add any magnetite or other media to device prior to using.

It must be stressed that this PoP prototype VFE device is highly experimental, and you are encouraged to use your best judgment and inner guidance in making a decision if you are tempted to purchase this experimental PoP prototype device.

Price: $860 per device. S/H charge for ground shipping within domestic mainland USA: $36


VFE-EGGS Water Treatment Device


All photos and photo captions identical to those displayed in the section devoted to the VFE-MEOW device, above.

I call the passive (non-motorized, non-powered) vortex type of field effect technology by the name "vortex field effect" or by the abbreviation VFE. In this VFE-EGGS version, the material used in the design is an exotic mineral ore and semi-precious gemstone combination which appears to exhibit powerful ormus-like subtle energy effects. This VFE-EGGS device does not contain any magnetite sand. VFE devices do not employ batch treatment as seen in traditional MEOW devices, and rather, employ a flow-thru design. The design is markedly unlike the traditional MEOW design wherein a bottle of water is placed inside a MEOW device for a period of time for treatment, and rather, the user pours a cupful or two of water through a VFE device for treatment, and the water emerges into a cup or pitcher a few seconds later, after having been treated. Please understand that this is a very new and experimental technology.

Brief Specifications:
Device is built into a 2 gallon white (or black) plastic bucket, fitted with a sealed lid. You are strongly encouraged not to open the sealed lid so as not to disrupt alignment of key components.
Syntropic antioxidative microbe technology has been used in the design and fabrication of the device.
This is a flow-thru device. Water is poured slowly into the top funnel, and emerges after a few seconds from port near bottom of bucket.
All copper tubing employed is food-grade tubing.
When in use, device must be placed near the edge of a countertop or table so that the spout extends over the edge, allowing user to place a cup or pitcher below device to collect water.
When device has not been used for over eight hours, please first flush the tube by pouring a quart or more of hot tap water thru it to flush any "old" water from inside the copper tubing prior to use. The waste flush water may be dumped into your compost pile, etc.
This device is highly experimental in nature.
All magnetite needed in the device for proper operation has been emplaced and embedded at time of fabrication of the device, and thus there is no need to add any magnetite or other media to device prior to using.

It must be stressed that this PoP prototype VFE device is highly experimental, and you are encouraged to use your best judgment and inner guidance in making a decision if you are tempted to purchase this experimental PoP prototype device.

Price: $860 per device. S/H charge for ground shipping within domestic mainland USA: $36

Click here to go to the Payments page if you wish to order.


Please note, due to my own concerns and due to regulations, all bottles of treated spring water offered here involve external and non-invasive physical treatment of water in a sealed bottle of spring water purchased from a local spring water vendor. 
All shipped bottles are never opened during treatment. All bottles are shipped bearing the original bottler's seal and bearing the original bottler's or vendor's label, with an additional small label indicating that the water has been exposed to the ormus water field treatment; label further specifies whether the treatment type was traditional MEOW or MEOW SM-2.
While I do mention elsewhere on this site that when treating water for my own use, I empty the contents of store-purchased spring water bottles and refill them with mountain well water on tap at home, along with a bit of unrefined sea salt, this is only done for water which we drink at home and I do not offer this type of water for sale. 

Please see below for terms and conditions of offer, and for ordering and payment information.

Terms and Conditions of Offer for These Products

Please understand that any and all products are PoP prototype devices and products, and are sold as experimental research devices and products only, and with no attendant claims of performance or effect. We have a no-return policy, and so there are no returns accepted and no refunds offered. All sales are final. There are no guarantees or warranties as to performance, effects, results, or workability offered, expressed, or implied. There are no other warranties or guarantees expressed or implied.

All orders must be prepaid. For devices and for water, please allow at least 14 business days between the time we receive cleared funds and the time of shipping, although we work to ship more quickly than that.

Please note that any calls or emails for any consulting purposes must be prepaid. 

Caveats

We cannot sell to residents of the states of Illinois or Maryland in the USA. We sell via the internet only, and ship all products only via UPS Ground, Fedex Ground or USPS Global Express Mail (for shipments outside the USA.)

Remember that we offer no warranty or guarantee, express or implied. All sales are final. No returns, no refunds. We do not sell consumer items, but rather only sell PoP prototype experimental research products and devices to individual experimenters and to researchers.

Payment

Please see terms and conditions of offering at top of page. If you are interested in purchasing any of these prototype products, and if you agree to the terms listed on this page and you meet the purchase requirements, please make your payment via the Payment page on this website.


Disclaimer

This material is offered solely for educational and informational purposes. Any products and/or information presented are not intended to diagnose, treat, cure or prevent any disease. These statements have not been evaluated by the FDA (in USA.)

Any products, technologies or devices mentioned on this page are experimental prototypes only, produced for the sole purposes of research and Proof of Principle (PoP) evaluation by professional or individual researchers or experimenters. The reader understands that the author is not engaged in rendering health or medical advice or services.  The site owner and authors provide this information, and the reader accepts it, with the understanding that people act on it at their own risk and with full knowledge that they should consult with licensed primary care medical professionals for any medical assistance they may need.  The author(s) of the material presented on this site are neither medical nor nutritional professionals. 


If you wish to learn more about my work and/or about my consulting services, please feel free to visit my main website at www.vinnypinto.us




Main Page | Build Your Own | Magnetite Sources | FAQ (Q&A)  | Test Results | Product Catalog | Special Offers |Payment | ContactCopyright | Disclaimer